2n Helios IP Configuration Manual v2.7 Manuel d'utilisateur télécharger pdf (Page 15)

152N TELEKOMUNIKACE a.s., www.2n.cz

Call prolongation confirmation signalling

Calls are time-limited in for security reasons2N Helios IP

(protection against blocking). Refer to the Miscellaneous

.subsection for details

Internal application launched

The internal application is launched upon power 2N Helios IP

up or restart. A successful launch is signalled by this tone

combination.

Connected to LAN, IP address received

2N Helios IP

logs in upon the internal application launch. A

.successful LAN login is signalled by this tone combination

Disconnected from LAN, IP address lost

This tone signals UTP cable disconnection from .2N Helios IP

Disconnection .is signalled by this tone combination

Invalid telephone number or invalid switch activation code

2N Helios IP

allows the user to dial an extension number

directly using the keypad or enter the door unlocking code. An

invalid code is signalled by this tone sequence.

Default reset of network parameters

Upon power up, a 30 s timeout is set for the default reset code

entering. Refer to the Device Configuration subsection in the 2N

Installation Manual for details. Helios IP

Call end signalling

2N Helios IP

enables the user to set a call end timeout to

avoid call blocking. Press a key on your VoIP phone to extend the

call time during this timeout.

Connected VoIP phone – 2N Helios IP call

This short tone signals successful connection between a VoIP

phone and .2N Helios IP

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 114 115

Pas de commentaire

2n Helios IP Configuration Manual v2.7 Manuel d'utilisateur Page 15