2n M2M Solution 2N SmartCom - User Manual 1.9.0 Manuel d'utilisateur télécharger pdf (Page 91)

912N TELEKOMUNIKACE a.s., www.2n.cz

- disconnection from the virtual port is in progress.Disconnecting

- the terminal is off-line, i.e. has been disconnectedTerminal Disconnected

from the SC server.

- the terminal has been disconnected by anotherDisconnect by other user

user. This means that the other user has interconnected its virtual port with this

terminal.

- an error occurrred during connection or disconnection.Error

The and fields display the amount of data transmitted in Incoming Outgoing Data

the given direction and are for information only. Check off toPermanent connection

enable automatic terminal connection to the virtual port upon the application start.

Press to interconnect the terminal with the virtual port. If one and the same portStart

is used by multiple terminals, the other users will not be able to press until theStart

first connection has been finished. Refer to the note below. Push to terminateStop

communication.

Note

Although there may be multiple terminals assigned to a virtual port,

one terminal can only be assigned to the port within one connection.

In case another user is connected to the terminal, the button has an orangeStart

background colour. You can push the button to disconnect the original user and

connect the terminal with your virtual port.

Use the cross to remove the selected row from the table, thus cancelling

interconnection between the virtual port of the application and the physical port of the

terminal easily.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 148 149

Pas de commentaire

2n M2M Solution 2N SmartCom - User Manual 1.9.0 Manuel d'utilisateur Page 91