2n M2M Solution 2N SmartCom - User Manual 1.9.0 Manuel d'utilisateur télécharger pdf (Page 35)

352N TELEKOMUNIKACE a.s., www.2n.cz

0 – none

1 – even

2 – odd

3 – constant 1

4 - constant 0

at^scport1="flowcontrol",1

Enter the command to set the flow control type. Setting options 0-1.

0 - no flow control

1 - hardware flow control

at^scport1="save"

Enter the command to save the changes.

at^scport1="restart"

Enter the command to restart the port.

at^scport1="srestart"

Enter the command to save the changes and restart the interface.

at^scport1?

Enter the command to display the currently set port values.

at^scport1=?

Enter the command to display the port setting options.

^SCPORT1: "BAUDRATE",110-230400

^SCPORT1: "DATA_BITS",5-8

^SCPORT1: "STOP_BITS",1-2

^SCPORT1: "PARITY",0-4

^SCPORT1: "FLOWCONTROL",0-1

^SCPORT1: "SAVE"

^SCPORT1: "RESTART"

^SCPORT1: "SRESTART"

Port 2 (RS 485/M-Bus) SC Commands

These commands are used for setting the RS 485/M-Bus parameters.

at^scport2="baudrate",9600

Enter the command to set the baud rate to 9,600 bps.

at^scport2="baudrate",115200

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 148 149

Pas de commentaire

2n M2M Solution 2N SmartCom - User Manual 1.9.0 Manuel d'utilisateur Page 35