2n Helios IP Configuration Manual v2.8 Manuel d'utilisateur télécharger pdf (Page 7)

72N TELEKOMUNIKACE a.s., www.2n.cz

Firmware Update

We also recommend you to update your intercom firmware upon the first login to the

intercom. Refer to for the latest firmware version. Press the www.2n.cz Update

button in the menu to upload firmware. TheFirmware System Maintenance /

intercom will get restarted upon upload and only then the updating process will be

complete. The process takes about 30 seconds.

SIP Server Connection Setting

Set the following parameters in the menu to allow yourServices Phone SIP / /

intercom make calls and be accessible within your VoIP infrastructure.

– set the name to be displayed as CLIP on the called party'sDisplay name

phone, in the login window and on the web interface start page.

– set the intercom phone number (or another unique IDPhone number (ID)

composed of characters and digits) to identify the intercom uniquely in calls and

registration.

– set the domain name of the service with which the intercom isDomain

registered. Typically, it is equivalent to the SIP Proxy or Registrar address. If you

do not use a SIP Proxy in your intercom installation, enter the intercom IP

address.

If you use a SIP server (Proxy, Registrar), set the addresses for the following network

elements:

1 2 3 4 5 6 7 8 9 10 11 12 ... 113 114

Pas de commentaire

2n Helios IP Configuration Manual v2.8 Manuel d'utilisateur Page 7