2n Helios IP Configuration Manual v2.8 Manuel d'utilisateur télécharger pdf (Page 63)

632N TELEKOMUNIKACE a.s., www.2n.cz

SIP 1 and SIP 2

The 2N® Helios IP intercoms allow two independent SIP accounts (SIP 1 and SIP 2 tabs)

to be configured. Thus, the intercom can be registered under two phone numbers, with

two different SIP exchanges and so on. Both the SIP accounts process incoming calls

equivalently. Outgoing calls are primarily processed by account 1, or, if account 1 is not

registered (due to SIP exchange error, e.g.), by account 2. Select the account number

for the phone numbers included in the phone directory to specify the account to be

used for outgoing calls (example: 2568/1 - calls to number 2568 go via account 1, sip:

calls to s[email protected]. ip uri via account 2).

Display name – set the name to be displayed as CLIP on the called party's

phone.

Phone number (ID) – set the intercom phone number (or another unique ID

including characters and digits). Together with the domain, this number

represents a unique intercom identification in calls and registration.

Domain – set the domain name of the service with which the intercom is

registered. Typically, it is identical with the SIP Proxy or Registrar address.

Use authentication ID – enable the use of an alternative ID for intercom

authentication. If disabled, the phone number defined above is used for

authentication.

Authentication ID – enter the alternative ID for authentication.

Password – enter the password for authentication. The parameter is applied on

if your PBX requires authentication.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 113 114

Pas de commentaire

2n Helios IP Configuration Manual v2.8 Manuel d'utilisateur Page 63