2n Omega Lite - Configuration Tool manual v1.8 Manuel d'utilisateur télécharger pdf (Page 105)

105

2.15.5. Types of Establishing Connection

It is possible to establish connection with an 2N



OMEGA Lite PBX to be

supervised:

 automatically; or

 manually.

2.15.6. AUTOMATIC CONNECTION

Settings of PBX To Be Supervised

Automatic connection can be used for a PBX provided that:

1. a DDI to the ISDN line ringing chart is reserved for remote supervision;

2. an ISDN MSN line is reserved for remote supervision;

3. a CO line is reserved for remote supervision;

4. the DISA to the ringing chart is used;

5. the modem connection detection is enabled in DISA.

Example of ringing chart set-up for types 1  3:

Interconnect remote supervision 

Ring to operator 

Wait 0

Hang up 

Example of ringing chart set-up for types 4  5:

DISA 

Wait 6

DISA END 

Ring to operator 

Wait 0

Hang up 

Note: With remote supervision type 5, you have to set the GLOBAL DATA 

MODEM  Modem switch to remote supervision in the programming

tool. The DISA tone may not be dialtone permanently.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 111 112

Pas de commentaire

2n Omega Lite - Configuration Tool manual v1.8 Manuel d'utilisateur Page 105